Filter
Top Products
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATOR'S GUIDE
207
Device
Notification for
Unreceived
Message
1. Yes
2. No
(No)
When this parameter has been set to "Yes" and when
unplayed messages remain, the system calls the
appropriate device in numerical order until all unplayed
messages are received.
Authorization
for External
Message
Delivery
1. Yes
2. No
(No)
When set to "Yes", Subscribers are able to utilize the
External Message Delivery feature. The sub-parameter
to be set is Prompt Mode. If set to "No", sub-parameter
cannot be assigned.
Prompt Mode
1. System
2. User 1
3. User 2
4. Selective
(User 1)
Specifies the language to be used for voice prompts.
Authorization
for Auto
Forwarding
1. Yes
2. No
(No)
When set to "Yes," messages that have not been accessed
for a specific length of time are forwarded automatically
to another mailbox. The sub-parameters to be set for this
feature include Mailbox Number, Delay Time, and
Forwarding Mode. If set to "No", sub-parameters cannot
be assigned.
Mailbox
Number
2-5 digits
(None)
Specifies the mailbox where forwarded messages are to
be sent.
Note
: System Group Distribution List numbers, and
mailbox numbers for System Manager and Message
Manager cannot be used for this parameter.
Delay Time (h) (min)
00:05 to 99:59
(00:30)
Specifies the length of time in hours and minutes that the
system must wait before forwarding messages that have
not been retrieved. The maximum delay time is 99 h, 59
min.
Note
: The delay time must be less than the New Message
Retention Time, or else messages will be deleted before
being forwarded.
Forwarding
Mode
1. Copy
2. Move
(Move)
Specifies if forwarded messages are to be retained in the
original mailbox. When set to "Copy," a copy of the
message is retained in the original mailbox after
forwarding. When set to "Move," messages are
forwarded to the receiving mailbox and are not retained
at the original location.
Table 37
Parameter Value Range
(Default)
Description/Function