i-mate PDA2 PDAs & Smartphones User Manual


 
Pocket PC Phone User Manual
130
Applications
Pocket PC Phone User Manual
131
Applications
6. After you have completed the selection of your attachment(s) and tapped Next, a
summarized Preview screen will list all the settings of this fax document. A small window
will show you a preview of the fax. Tap this window to open a larger preview screen, which
also enables you to write a note on the documents.
7. Tap Send to connect to your internal modem and send all composed faxes. A duplicate
copy will be stored in the Outbox folder. As soon as the fax-sending dialog is open, the
Pocket PC Phone will automatically switch to Flight mode. Once the fax is successfully
sent, the Flight mode is automatically switched off and your Pocket PC Phone will return
to normal connectivity status.
Receiving a fax
To receive faxes with Truefax via your
Pocket PC Phone,
you need a special
fax number
assigned by your mobile Pocket PC Phone operator. Currently, it's not possible to receive
faxes through your Pocket PC Phone with a standard mobile phone number. Contact your
mobile operator for the availability of this service. To receive a fax:
1. Tap Start > Programs > Truefax.
2. Tap in the menu bar to open the receipt dialog and to activate the modem. Truefax
will then wait for incoming faxes.
3. After the fax has been received, Truefax will switch to Waiting for incoming call. To close
the receipt dialog, tap the Cancel button and wait until the button changes to Close, which
could take some time.
4. You will nd the document in the fax Inbox folder when a fax has been received.
Re-activating the phone module
After a fax has been sent or received, you need to do the following in order to re-activate
the phone module of your Pocket PC Phone.
1. Tap the antenna symbol on the Taskbar to open the Connectivity screen of your Pocket
PC Phone.
2. Tap Turn off ight mode in the dialog that appears.
3.
After a while, the "x" of the antenna symbol will be replaced by a "!" and the antenna symbol
with the signal bars will re-appear.
In certain situations it is necessary to re-enter your PIN code in order to re-connect to a GPRS
network.