HTC VOGU100 Telephone User Manual


 
Section 10: Getting Connected 119
Export in Outlook to import it.
To send information to a Bluetooth-enabled device such as another smart device, follow steps 3 to 6 in the
above procedure.
Note:
If the device you want to send to does not appear in the box, make sure that it is turned on and visible.
To receive a Bluetooth signal:
Your device will not detect and notify you of incoming Bluetooth signals unless you set it up to do this.
1. Tap Start > Settings > Connections tab > Beam.
2. Select the Receive all incoming beams check box.
3. Make sure your device is turned on, visible, and within Bluetooth range of the device that is sending
the information.
4. When prompted to receive an incoming signal, tap Yes to receive the information.