ClearOne comm SR 1212 Conference Phone User Manual


 
256
Reserved 2 0
OFFA – Off Attenuation Mode
This command selects/reports the off attenuation value of a Mic channel.
Command Form: DEVICE OFFA <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 3 (M)
Value Unsigned
Float
2 0.00 – 60.00
(Null to query in text)
PAA – PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified Mic.
Command Form: DEVICE PAA <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 3 (M)
Value Unsigned Integer 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
PACEN – PA Softclipper Enable
This command changes enables the softclipper function on a power amplifier channel.
Command Form: DEVICE PACEN <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 23 (J)
Value Unsigned
Short
2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
PAENERGY – PA Energy-saver mode
This command switches the 36-volt rails off and on for the power amplifier. It is intended to be used for a low power
or energy saving mode.
Command Form: DEVICE PAENERGY [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 23 (J)
Value Unsigned
Short
2 0 = Energy Saver Mode OFF (Power Amp On)
1 = Energy Saver Mode ON (Power Amp Off)
(Null to query in text)