ClearOne comm SR 1212 Conference Phone User Manual


 
239
ENETGATE – Ethernet Default Gateway Address
This command selects/reports the default gateway of the Ethernet port on the unit.
Command Form: DEVICE ENETGATE [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text)
ENETSUBN – Ethernet Subnet Mask
This command selects/reports the Subnet mask of the Ethernet port on the unit.
Command Form: DEVICE ENETSUBN [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text)
EREF – Expansion Bus Reference
This command selects an output or reports which output is the expansion bus reference.
Command Form: DEVICE EREF <Channel> [Value Channel Value Group]
Argument Type Size Values Units
Channel Channel 1 See Reference Channels in Groups and Channels
Group Group 1 8 (A, E)
Value Channel 1 0 = none
See 2, 20 (O, B) in Groups and Channels
(Null to query in text)
Value Group 1 0 for none or 2, 20 (N for none or O, B)
EVENT – Run Scheduled Event
This command manually runs a scheduled event on a unit. There is no query associated with this command.
Command Form: DEVICE EVENT <Channel> <Group>
Argument Type Size Values Units
Channel Channel 1 1 - 10
Group Group 1 21 (Q)
Reserved Unsigned Short 2 0
FE – Feedback Elimination Enable
This command enables or disables feedback elimination on the power amplifier channel.
Command Form: DEVICE FE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Short 2 0 = On
1 = Off
2 = Toggle
(Null to query in text)
FEB – Feedback Elimination Bandwidth
This command sets the filter bandwidth of the notch filter. Options are a Q = 5 or Q = 10
Command Form: DEVICE FEB <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)