Filter
Top Products
122
TELCO TX SETTINGS
Telco Tx Settings enable you to customize telephone transmit channel settings using the Channel screen.
Accessing Telco Tx Settings
With the Channel tab selected on the Tab Bar, select the Telco Tx channel on the Tree View tab in the Site Pane.
As shown above, the Center Pane displays a signal flow diagram for the telco tx channel, real-time peak-level
meters, as well as the channel routing matrix, which shows the audio routing configuration for the channel.
Configuration settings for the telco tx channel are displayed as controls (buttons, sliders, etc.) which are located at
the appropriate stage in the signal flow.
The following sections describe how to use these controls to configure telco transmit settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional). Label changes are global, and appear
throughout Console wherever the label is referenced.
Dialer Button
The Dialer button opens the telephone dialer (shown below), allowing you to place calls to establish a conference
call with a remote location.