ClearOne comm SR 1212 Conference Phone User Manual


 
199
Using Device Log
In the Device Log window, select the events you want to log using the Event Selection check boxes.
Events available for logging include:
Reset• : Reports unit reset events
Errors• : Reports internal unit errors
Access: • Reports all web, Telnet, front panel, and USB access events
System Checks• : Reports the pass/fail status of System Checks
Firmware Download• : Reports firmware downloads
Default• : Reports unit default events
Safety Mute• : Reports safety mute events
Macro• : Reports Macro execution events
Preset• : Reports when Presets are run
Audio Clipping• : Reports audio clipping events
Telco On/Off• : Reports when the telco line goes on or off hook
Dial• : Reports dial command events including DTMF, Phonebook, Speed Dial, and Redial
Call Duration• : Reports the time between on and off hook events for all calls
Microphone Gains• : Reports microphone gain levels
Processor Gains• : Reports processor gain levels
Fader Gains• : Reports fader gain levels
Telco Gains• : Reports telco gain levels
Power Amp• . Gains: Reports power amp gain levels
Caller ID• : Shows Caller ID report
Power Amp. Errors• : Reports power amp errors
NOTE: All device events and Event Scheduler events are logged automatically.
Use the Refresh, Clear, Save, and Print buttons to refresh the log display, clear the log, save the log to a text file,
and print the log.