Filter
Top Products
153
than one microphone to gate on at same time, but it restricts more than one mic from
gating on to the same audio source. It does this by determining the audio level received
by all mics when the first mic is gated on, and then using this audio level as the ambient
level for the gating group. If First Mic Priority is disabled, two or more microphones will
usually gate on when only one person speaks.
Select the • Max # of Mics from the drop-down list (the default is 4). This sets the maximum number of
microphones that can be gated on at any one time within a gating group. Again, the maximum number of
mics is limited to the number of mics included in the gating group. For global gating groups, the maximum
number of mics is eight, up to a maximum of 96 microphones in E-bus linked systems.
Select the • Last Mic Mode from the drop-down list (the default is off). Last On leaves the last mic activated
gated on until another mic gates on. The Input options allow you to select which mic remains on when all
other mics gate off. Off gates all mics off when no audio is present.
For additional information, refer to the Table of Contents for these related topics:
Mic Input Settings•
Channel Tab Overview•
Mic Gating•
Expansion Bus Overview•