Filter
Top Products
Using Intercom Calling Features
Placing a Call
On an MLS- or MLC-Model Phone*
To ring another extension
To voice page another extension
1. Press [
Intercom
].
You hear the intercom dial tone.
2. Lift the handset if desired.
3. Dial the extension jack number.
1. Press [
Intercom ].
You hear the intercom dial tone.
2. Lift the handset if desired.
3. Dial [
*
] and an extension jack number
After the beep, start talking.
Your voice is heard on the speaker at the
paged MLS-model phone.
*
If you are using an MLC-6 cordless phone, make sure the handset is on before following these
instructions. For more information on using the MLC-6 phone, see AT&T MLC-6 Cordless
Telephone Quick Reference: Display and Controls.
Answering a Call
On an MLS- or MLC-Model Phone*
To answer a ringing call using Direct Line
Pickup
To answer a call ringing at another
extension
See page 5-16 for instructions on programming a
Pickup Group.
1. Lift the handset.
2. Press [
Intercom ].
3. Dial [
6
] [
8
] pIus the two-digit line jack
number of the ringing line.
1. Lift the handset.
2. Press [ Intercom ].
3. Dial [
6
] plus the two-digit extension jack
number of the ringing extension.
*
If you are using an MLC-6 cordless phone, make sure the handset is on before following these
instructions. For more information on using the MLC-6 phone, see AT&T MLC-6 Cordless
Telephone Quick Reference: Display and Controls.
Using Intercom Features
B-3