Filter
Top Products
Chapter 5 Broadband
EMG5324-D10A User’s Guide
85
5.2.1 Add/Edit Internet Connection
Use this screen to configure a WAN connection. The screen varies depending on the interface type,
encapsulation, and WAN service type you select.
5.2.1.1 Routing
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select Routing as the encapsulation mode.
Figure 16 Broadband Add/Edit: Routing
IGMP Proxy This shows whether IGMP (Internet Group Multicast Protocol) is activated or not for this
connection. IGMP is not available when the connection uses the bridging service.
NAT This shows whether NAT is activated or not for this connection. NAT is not available when
the connection uses the bridging service.
Default
Gateway
This shows whether the Device uses the interface of this connection as the system default
gateway.
Modify Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the Device. A window displays asking
you to confirm that you want to delete the connection.
Table 5 Network Setting > Broadband (continued)
LABEL DESCRIPTION