Chapter 23 The SNMP Screen
EMG5324-D10A User’s Guide
258
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
To change your Device’s SNMP settings, click Maintenance > SNMP to display the screen as
shown.
Figure 139 Maintenance > SNMP
The following table describes the labels in this screen.
Table 99 Configuration > Management > Remote MGMT > SNMP
LABEL DESCRIPTION
Get Community
Enter the password for the incoming Get and GetNext requests from the management
station. The default is public and allows all requests.
Set Community
Enter the password for incoming Set requests from the management station. The default is
public and allows all requests.
Trap
Community
Type the trap community, which is the password sent with each trap to the SNMP manager.
The default is public and allows all requests.
Trap
Destination
Type the IP address of the station to send your SNMP traps to.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
