Filter
Top Products
Chapter 3 Tutorials
EMG5324-D10A User’s Guide
33
6 Click Connection Status > System Info.Verify your wireless and wireless security settings under
Device Information and check if the WLAN connection is up under Interface Status.
Tutorial: Network > Wireless LAN > SecuritOpen the Status screen. Verify your wireless and wireless security settings under Device In formation and check if the WLAN connection is up under Interface Status
Tutorial: Status
This finishes the configuration of the AP.
3.2.3 Configuring the Wireless Client
This section describes how to connect the wireless client to a network.
3.2.3.1 Connecting to a Wireless LAN
The following sections show you how to join a wireless network using the ZyXEL utility, as in the
following diagram. The wireless client is labeled C and the access point is labeled AP.
Wireless LAN Setup
There are three ways to connect the client to an access point.
• Configure nothing and leave the wireless client to automatically scan for and connect to any
available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific network or peer
computer.
This example illustrates how to manually connect your wireless client to an access point (AP) which
is configured for WPA-PSK security and connected to the Internet. Before you connect to the access
C
AP