Filter
Top Products
Chapter 4 Connection Status and System Info
EMG5324-D10A User’s Guide
79
System Resource
CPU Usage This field displays what percentage of the Device’s processing ability is currently used. When
this percentage is close to 100%, the Device is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications.
Memory
Usage
This field displays what percentage of the Device’s memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the Device
is probably becoming unstable, and you should restart the device. See Chapter 28 on page
269, or turn off the device (unplug the power) for a few seconds.
USB Status
Type This shows the type of device connected to the Device.
Status This shows whether the device is currently active (Up). This shows N/A if there are no
device connected to the Device or the connected device is not working.
Registration Status
Account This column displays each SIP account in the Device.
Action This field displays the current registration status of the SIP account. You have to register
SIP accounts with a SIP server to use VoIP.
If the SIP account is already registered with the SIP server,
•Click Unregister to delete the SIP account’s registration in the SIP server. This does not
cancel your SIP account, but it deletes the mapping between your SIP identity and your
IP address or domain name.
• The second field displays Registered.
If the SIP account is not registered with the SIP server,
•Click Register to have the Device attempt to register the SIP account with the SIP
server.
• The second field displays the reason the account is not registered.
Inactive - The SIP account is not active. You can activate it in VoIP > SIP > SIP
Settings.
Register Fail - The last time the Device tried to register the SIP account with the SIP
server, the attempt failed. The Device automatically tries to register the SIP account when
you turn on the Device or when you activate it.
Account
Status
This shows Active when the SIP account has been registered and ready for use or In-
Active when the SIP account is not yet registered.
URI This field displays the account number and service domain of the SIP account. You can
change these in VoIP > SIP > SIP Settings.
Table 4 System Info Screen (continued)
LABEL DESCRIPTION