Filter
Top Products
Chapter 22 Remote MGMT
EMG5324-D10A User’s Guide
256
22.2 The Remote MGMT Screen
Use this screen to decide what services you may use to access which Device interface. Click
Maintenance > Remote MGMT to open the following screen.
Figure 137 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 98 Maintenance > Remote MGMT
LABEL DESCRIPTION
Services This is the service you may use to access the Device.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the LAN and WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the WAN.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.