Filter
Top Products
Chapter 18 VoIP
EMG5324-D10A User’s Guide
231
The following table describes the labels in this screen.
18.6 The Phone Region Screen
Use this screen to maintain settings that depend on which region of the world the Device is in. To
access this screen, click VoIP > Phone > Region.
Figure 122 VoIP > Phone > Region
Each field is described in the following table.
Table 83 Phone Device: Edit
LABEL DESCRIPTION
SIP Account to Make Outgoing Call
SIP Account Select the SIP account you want to use when making outgoing calls with the analog phone
connected to this phone port.
SIP Number
This shows the SIP account number.
SIP Account(s) to Receive Incoming Call
SIP Account Select a SIP account if you want to receive phone calls for the selected SIP account on
this phone port.
If you select more than one SIP account for incoming calls, there is no way to distinguish
between them when you receive phone calls. If you do not select a source for incoming
calls, you cannot receive any calls on this phone port.
SIP Number
This shows the SIP account number.
Apply Click Apply to save your changes.
Back Click Back to return to the previous screen without saving.
Table 84 VoIP > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the Device is located.
Call Service
Mode
Select the mode for supplementary phone services (call hold, call waiting, call transfer and
three-way conference calls) that your VoIP service provider supports.
• Europe Type - use supplementary phone services in European mode.
• USA Type - use supplementary phone services American mode.
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
Apply Click this to save your changes and to apply them to the Device.
Cancel Click this to set every field in this screen to its last-saved value.