ZyXEL Communications EMG5324-D10A IP Phone User Manual


 
Chapter 30 Troubleshooting
EMG5324-D10A User’s Guide
277
3 If the problem continues, contact your ISP.
The Internet connection is slow or intermittent.
1 There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.6 on page 20.
If the Device is sending or receiving a lot of information, try closing some programs that use the
Internet, especially peer-to-peer applications.
2 Turn the Device off and on.
3 If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.
Advanced Suggestions
Check the settings for QoS. If it is disabled, you might consider activating it. If it is enabled, you
might consider raising or lowering the priority for some applications.
30.5 Wireless Internet Access
What factors may cause intermittent or unstabled wireless connection? How can I solve this
problem?
The following factors may cause interference:
Obstacles: walls, ceilings, furniture, and so on.
Building Materials: metal doors, aluminum studs.
Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless
devices.
To optimize the speed and quality of your wireless connection, you can:
Move your wireless device closer to the AP if the signal strength is low.
Reduce wireless interference that may be caused by other wireless networks or surrounding
wireless electronics such as cordless phones.
Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and
the wireless client.
Reduce the number of wireless clients connecting to the same AP simultaneously, or add
additional APs if necessary.
Try closing some programs that use the Internet, especially peer-to-peer applications. If the
wireless client is sending or receiving a lot of information, it may have too many programs open
that use the Internet.