Filter
Top Products
Chapter 4 Connection Status and System Info
EMG5324-D10A User’s Guide
78
Mode This is the method of encapsulation used by your ISP.
IP Address This field displays the current IP address of the Device in the WAN.
IP Subnet
Mask
This field displays the current subnet mask in the WAN.
LAN Information
IP Address This field displays the current IP address of the Device in the LAN.
IP Subnet
Mask
This field displays the current subnet mask in the LAN.
DHCP
Server
This field displays what DHCP services the Device is providing to the LAN. Choices are:
Server - The Device is a DHCP server in the LAN. It assigns IP addresses to other
computers in the LAN.
None - The Device is not providing any DHCP services to the LAN.
WLAN Information
Channel This is the channel number used by the Device now.
WPS Status Configured displays when a wireless client has connected to the Device or WPS is enabled
and wireless or wireless security settings have been configured. Unconfigured displays if
WPS is disabled or wireless security settings have not been configured.
SSID (1~4) Information
SSID This is the descriptive name used to identify the Device in the wireless LAN.
Status This shows whether or not the SSID is enabled (on).
Security
Mode
This displays the type of security the Device is using in the wireless LAN.
Interface Status
Interface This column displays each interface the Device has.
Status This field indicates whether or not the Device is using the interface.
For the EtherWAN interface, this field displays Up when the Device is using the interface and
Down when the Device is not using the interface.
For the LAN interfaces, this field displays Up when the Device is using the interface and
Down when the Device is not using the interface.
For the WLAN interface, it displays Active when WLAN is enabled or InActive when WLAN
is disabled.
For the 3G interface, it displays Enabled when 3G is enabled or Disabled when 3G is
disabled.
Rate For the LAN interfaces, this displays the port speed and duplex setting.
For the WAN interface, this displays the port speed and duplex setting.
For the WLAN interface, it displays the maximum transmission rate when WLAN is enabled
or N/A when WLAN is disabled.
For the 3G interface, it displays the maximum transmission rate when 3G is enabled or N/A
when 3G is disabled.
System Status
System Up
Time
This field displays how long the Device has been running since it last started up. The Device
starts up when you plug it in, when you restart it (Maintenance > Reboot), or when you
reset it (see Section 1.7 on page 22).
Current
Date/Time
This field displays the current date and time in the Device. You can change this in
Maintenance > Time Setting.
Table 4 System Info Screen (continued)
LABEL DESCRIPTION