Filter
Top Products
Chapter 3 Tutorials
EMG5324-D10A User’s Guide
32
3.2.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
1 Open the Network Setting > Wireless > General screen in the AP’s web configurator.
Tutorial: Network > Wireless LAN > General
2 Make sure Enable Wireless LAN is selected.
3 Enter “SSID_Example3” as the SSID and select Auto in the Channel Selection field to have the
device search for an available channel.
4 Select 802.11b/g in the Mode Select field.
5 Select More Secure as your security level and set security mode to WPA-PSK and enter
“12MyWPAPSKpresharedkey34” in the Pre-Shared Key field. Click Apply.