Filter
Top Products
Chapter 2 Introducing the Web Configurator
EMG5324-D10A User’s Guide
27
Wireless General Use this screen to turn the wireless connection on or off, specify the
SSID(s) and configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Device.
WPS Use this screen to use WPS (Wi-Fi Protected Setup) to establish a
wireless connection.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Scheduling Use this screen to configure when the Device enables or disables the
wireless LAN.
Channel Status Use this screen to scan wireless LAN channel noises and view the
results.
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to enable the UPnP function.
File Sharing Use this screen to enable file sharing via the Device.
Media Server Use this screen to enable or disable the sharing of media files.
Printer Server Use this screen to enable or disable sharing of a USB printer via your
Device.
Static Route Static Route Use this screen to view and set up static routes on the Device.
DNS Route DNS Route Use this screen to view and configure DNS routes.
QoS General Use this screen to enable QoS and decide allowable bandwidth using
QoS.
Queue Setup
Use this screen to configure QoS queue assignment.
Class Setup Use this screen to set up classifiers to sort traffic into different flows
and assign priority and define actions to be performed for a classified
traffic flow.
Monitor
Use this screen to view each queue’s statistics.
NAT Port Forwarding Use this screen to make your local servers visible to the outside
world.
Sessions Use this screen to limit the number of NAT sessions a single client can
establish.
Address Mapping Use this screen to change your Device’s address mapping settings.
ALG Use this screen to enable or disable SIP ALG.
Dynamic DNS Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
Interface
Group
Interface Group Use this screen to map a port to a PVC or bridge group.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services Use this screen to set the default action to take on outgoing network
traffic.
Access Control Use this screen to enable specific traffic directions for network
services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
Table 2 Navigation Panel Summary (continued)
LINK TAB FUNCTION