Chapter 3 Tutorials
EMG5324-D10A User’s Guide
40
The following parameters are used in this example:
3.4.1 VoIP Calls With a Registered SIP Account
To use a registered SIP account, you should configure the SIP service provider and applied for a SIP
account.
3.4.1.1 SIP Service Provider Configuration
Follow the steps below to configure your SIP service provider.
1 Make sure your Device is connected to the Internet.
2 Open the web configurator.
3 Click VoIP > SIP to open the SIP Service Provider screen. Select ChangeMe from the Service
Provider Selection drop-down list box.
4 Select the Enable check box of SIP Service Provider and enter ServiceProvider1 as the SIP
Service Provider Name. Enter the SIP Server Address, REGISTER Server Address, and SIP
Service Domain provided by your ISP accordingly. Click Apply.
SIP Service Provider Name ServiceProvider1
SIP Server Address sip.example.com
REGISTER Server Address registersip.example.com
SIP Service Domain sip.example.com
SIP Account Number 12345678
Username ChangeMe
Password ThisIsMySIP
