Filter
Top Products
EMG5324-D10A User’s Guide 281
CHAPTER 31
Wall-mounting Instructions
Do the following to hang your Device on a wall.
Note: See Table 155 on page 282 for the size of screws to use and how far apart to place
them.
1 Align the holes on the back of the supplied wall-mounting bracket with the screws. on the wall.
2 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
3 Drill two holes on the wall with screws inserted in the wall-mounting bracket. The distance between
the screws is 132.3mm.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the Device
with the connection cables.
Figure 153 Wall-mounting -1