Filter
Top Products
Chapter 6 Wireless
EMG5324-D10A User’s Guide
108
The following table describes the labels in this screen.
6.6 Scheduling Screen
Click Network Setting > Wireless > Scheduling to open the Wireless LAN Scheduling screen.
Use this screen to configure when the Device enables or disables the wireless LAN.
Figure 29 Network Setting > Wireless > Scheduling
The following table describes the labels in this screen.
Table 18 Network Setting > Wireless > WMM
LABEL DESCRIPTION
Enable WMM of
SSID1~4
This enables the Device to automatically give a service a priority level according to the ToS
value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service)
gives high priority to voice and video, which makes them run more smoothly.
Enable WMM
Automatic
Power Save
Deliver (APSD)
Click this to increase battery life for battery-powered wireless clients. APSD uses a longer
beacon interval when transmitting traffic that does not require a short packet exchange
interval.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 19 Network Setting > Wireless > Scheduling
LABEL DESCRIPTION
Wireless LAN
Scheduling
Select Enable to activate wireless LAN scheduling on your Device.
WLAN status Select On or Off to enable or disable the wireless LAN.
Day Select the day(s) you want to turn the wireless LAN on or off.
Between the
following times
Specify the time period during which to apply the schedule.
For example, you want the wireless network to be only available during work hours. Check
Mon ~ Fri in the day column, and specify 8:00 ~ 18:00 in the time table.