Filter
Top Products
Chapter 6 Wireless
EMG5324-D10A User’s Guide
103
The following table describes the labels in this screen.
6.3 The More AP Screen
The Device can broadcast up to four wireless network names at the same time. This means that
users can connect to the Device using different SSIDs. You can secure the connection on each SSID
profile so that wireless clients connecting to the Device using different SSIDs cannot communicate
with each other.
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 25 Network Settings > Wireless > More AP
Table 14 Wireless > General: More Secure: WPA(2)
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Choose WPA or WPA2 from the drop-down list box.
Authentication Server
IP Address Enter the IP address of the external authentication server in dotted decimal notation.
Port
Number
Enter the port number of the external authentication server. The default port number is
1812.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Shared
Secret
Enter a password (up to 128 alphanumeric characters) as the key to be shared between the
external authentication server and the Device.
The key must be the same on the external authentication server and your Device. The key is
not sent over the network.
more.../hide
more
Click more... to show more fields in this section. Click hide more to hide them.
WPA
Compatible
This field is only available for WPA2. Select this if you want the Device to support WPA and
WPA2 simultaneously.
Group Key
Update Timer
The Group Key Update Timer is the rate at which the RADIUS server sends a new group
key out to all clients.
If the value is set to “0”, the update timer function is disabled.
Encryption If the security mode is WPA, the encryption mode is set to TKIP to enable Temporal Key
Integrity Protocol (TKIP) security on your wireless network.
If the security mode is WPA2, the encryption mode is set to AES to enable Advanced
Encryption System (AES) security on your wireless network. AES provides superior security
to TKIP.