Filter
Top Products
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Directory Number Administration
87
Administration Menu (DKAdmin)
4. Highlight the 24s Dly field for the desired DN. The spacebar toggles the field between
enabled and disabled. When the field is enabled a check mark is displayed in the field and
a 24-second delay before ringing occurs.
Note You cannot enable both the 12s Dly field and the 24s Dly field. Enabling either field,
automatically disables the other.
➤ To specify your ringing options
1. From the Directory
Number
Administration for
Primary DN XXX
screen, highlight the
desired DN number
and press F2. The
Directory Number CO
Line Ringing
Assignment screen for
the selected DN
displays (shown right).
For each of your CO
lines, you can set/
change the following options for your day, day 2 and night operations:
♦ Immediate ring
♦ 12- or 24-second ring delay
♦ Specified DN LED to flash during a ring.
2. Highlight the DAY Imm. Ring field for the desired CO Line. The spacebar toggles the
field between enabled and disabled. When the field is enabled a check mark is displayed in
the field and DAY immediate ring occurs.
3. Highlight the 12s Dly field for the desired CO line. The spacebar toggles the field between
enabled and disabled. When the field is enabled a checkmark is displayed in the field and
a 12-second delay before ringing occurs.
4. Highlight the 24s Dly field for the desired CO line. The spacebar toggles the field between
enabled and disabled. When the field is enabled a checkmark is displayed in the field and
a 24-second delay before ringing occurs.
Note You cannot enable both the 12s Dly field and the 24s Dly field. Enabling either field,
automatically disables the other.
5. Highlight the
*
81 LED field and press F6 or Enter. A pop-up box displays with your
available choices. Highlight the [DN] LED you want to flash during a day ring and press
Enter.
6. Highlight the DAY2 Imm Rng and NITE Imm Rng fields and repeat Steps 2 ~ 5.
7. Press F10 to save you entries and return to the Directory Number Administration screen.