Filter
Top Products
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– System Utilities
125
Options Menu
➤ To display the communication settings
1. Type o. The Option Menu displays.
2. Type i. The System Installation Submenu displays.
3. Type o. The Communications Setup
screen displays (shown right).
4. To change the Communication port,
press Enter. A pop-up ports
window displays.
5. Highlight the desired port and press
Enter.
6. Verify (change if required) that the communication parameters are correct per the first
paragraph of this section.
7. Verify (change if required) that the modem and modem/DIU initialization strings are
correct; these strings are sent to modems when using the DKAdmin/DKBackup Dial DK
option:
♦ Direct Modem Initialization: AT; sent to modem connected directly to DKAdmin/
DKBackup PC COM port or modem installed in DKAdmin/DKBackup PC.
Note If using a fax/modem, you may have to enter &Q6 to the modem initialization string.
♦ Modem/DIU Initialization: ATS0=1 S2=43 E0 Q0 &C1 &D2 V1 &W0 8Y0; sent to
modem connected to a PDIU-DS modem pool.
8. Press Esc to close the screen.
System Utilities
ReIndex Files
➤ To reindex files
1. From the Options Menu, type u. A pop-up box displays.
2. Press Enter to select ReIndex Files and the files are automatically reindexed.
3. Press Esc to return to the Options Menu.