Filter
Top Products
27
Using DKAdmin/DKBackup
Using DKAdmin/DKBackup 4
This chapter shows you how to log on and off DKAdmin/DKBackup, use the pull-down
menus and select system options, respond to system and error messages, and describes the
keyboard conventions used in the programs.
Before You Start
Before using DKAdmin/DKBackup, you must:
♦ Connect your personal computer to a Strata DK in order to send/receive data between the
DKAdmin/DKBackup PC and a Strata DK (see Appendix A – Connecting to Strata DK
for procedures).
♦ Properly install the DKAdmin/DKBackup hardware key (see Chapter 2 – Installing
DKAdmin and Chapter 3 – Installing DKBackup for procedures).
♦ Correctly set your communications (see Chapter 8 – Options Menu).
Logging On
DKAdmin
➤ To log on to DKAdmin
1. After powering up your
computer, at the C:\
prompt type CD
280ADMIN and press
Enter.
2. From the C:\280ADMIN
prompt, type dkadmin
and press Enter. The
Toshiba start-up page
displays (shown right).
3. Type your User ID and
press Enter.
4. Type your password and
press Enter.