Filter
Top Products
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– System/Station Administration
51
Administration Menu (DKAdmin)
Change Verified
A.C.
If selected for this feature, a station can change the Verified Account Codes established in
Program 69.
Change T.C.O.
Code
If selected for this feature, a station can change the Toll (Restriction) Class Override
codes.
DND Override
Allowed
If selected for this feature, a station can override other stations that are in the DND mode.
Executive
Override
Allowed
This program enables a station to break into and overhear an existing station conversation
by dialing the digit
3 after the busy station number. A warning tone may be set optionally.
Private Override
Allowed
Privacy Override enables a station to enter into and overhear an existing CO line
conversation by pressing a common CO line button.
Page Group
Assignments
(A ~ D)
Digital and electronic telephones can be assigned to intercom page groups with this
program. Each group can have as many as 120 stations. The RCTUC/RCTUD common
control unit can support as many as eight groups, and the RCTUB and the RCTUA units
can support up to four. Telephones can be a member of more than one group. Station
users can access each group separately by dialing access codes.
Handsfree
Disabled
It is possible to disable the intercom handsfree function on any digital or electronic
telephone.
Handsfree No
Warning
Normally, a one-second warning tone is sent to a handsfree digital or electronic telephone
to inform its user that someone is calling and that they can be heard. If the warning tone is
not desired, this assignment can disable it.
OCA Enabled
(Receive)
A busy digital or electronic telephone can receive a second voice communication on
intercom via Handsfree Answerback if the OCA feature is installed. If a calling station does
not have the automatic function, the user must dial an extra digit of
2 after hearing busy
tone in order to gain access to OCA.
All Call Page
Allowed
Assigns the station to be included in the All Call Paging group. A maximum limit of 120
telephones (Toshiba digital or electronic) can be assigned to receive all call page.
BOV Tone
(Off = 2 Beeps,
On =
Continuous)
If a digital or electronic telephone [DN] is busy and it receives a call on an idle [DN] or CO
button from another station or an outside line, the telephone receives two muted-ring
bursts three seconds apart or continuously repeating muted-ring bursts every three
seconds on the idle [DN].
Pooled Line
(On = No Flash if
No Ring)
If on, incoming line calls in pooled line groups only flash on pooled line buttons.
HS-OCA
WNT (Off = No
WNT, On = S-
OCA WNT)
Activates/deactivates 2-way voice path to Off-hook Call Announce caller. Available only on
digital telephones.
OCA
(Off = Speaker,
On = Handset)
A busy digital or electronic telephone can receive a second voice communication over the
telephone handset/headset or over the telephone speaker.
Block Exec/
Privacy Override
If selected, executive and privacy override to the selected station is not allowed.
Group Pickup
Assignments
(1 ~ 20)
Stations can be divided into as many as 20 pickup groups. Station users can pick up calls
that are ringing any station within their group by dialing a single access code for a flexible
button, and pick up calls that are ringing stations in other groups by dialing selected
access codes. Stations can belong to more than one group.
Table 3 Attribute Definitions
(continued)
Attribute Description