Filter
Top Products
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Backup Data
101
Backup Menu (DKBackup)
The DK System Program File screen displays listing the available data for backup (see
screen in Step 3). For security, this code does not display on screen as you type it. The
default code is 0000. This is the “1st level password” which is set in the Strata DK
Program 00 (see the record sheet for Program 00 in the Strata DK Programming Manual).
Note If the Problem: Unable to Establish Communications screen displays, follow the
troubleshooting steps on the screen and/or see Appendix A – Connecting to Strata DK
to correct the problem.
3. Highlight the program file you wish to back up (download) and press the spacebar to tag
(checkmark) the program file (shown below). Repeat this step for as many program files
as you wish to back up. Press F2 to tag all program files (see Note “The DK System
Program File...” on Page 102).
4. After selecting the programs, press F3. The screen prompts with the message “You
will receive data from the DK. Are you sure?”
5. Highlight Yes and press Enter.
6. DKAdmin/DKBackup prompts you to enter the DK Code again. When the correct code is
entered, DKAdmin/DKBackup turns on LED10 in Program 77-1 and then downloads all
files selected in Step 3. The screen displays Download Complete when finished.
7. Press Esc twice and select the next desired function.
Notes
● When you back up PRGALL, the DK security code set in the DKAdmin/DKBackup
customer database, is not sent to the processor. You must always enter the DK security
code that is actually programmed on the processor installed in the Strata DK. You can
change the DK security code using the DKAdmin Program Administration Section option
or manually using the programming telephone.
● Access to the DK Code should be considered highly confidential and only given to those
individuals with the security level which enables them to program or update DK data. If
changing the Strata DK Program 00 Passwords, always change both Level 1 and 2 for
security. DKAdmin/DKBackup checks both codes and runs with either code.
DK System Program File
✔
Program No. Program Title
PRGALL All System Programs
REPALL All Station and System Speed Dial Numbers
NAMEALL All User Names
VIDALL All Voice Mail ID Codes (#656)
MIDALL All Voice Mail Message Waiting Codes (#657)
ADMEMOAL All Station and System Speed Dial Memos
MSGALL All Station and System LCD Messages
CFALL Directory Number Call Forwarding settings (R3)
MWALL Message Waiting Lamp settings (R3)
CLID Caller ID/ANI Lost Call telephone numbers (R3)
F1-Help SPACE-(Un)Tag F2-(Un)Tag All F3-Backup F4-Restore F5-Upgrade
Esc-Exit
Select If Marked