Filter
Top Products
Flexible Button Programming Section –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
66
DKAdmin/DKBackup
The selected feature replaces the previous feature.
Notes
● You can only assign a feature to one button within a console. If you attempt to assign a
feature already assigned, an error message displays.
● Press F8–Increment SD to add additional speed dial key assignments.
Important! You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message Must
Assign System/Station Speed Dial First displays.
If you leave the cursor in the same field and continue to press F8, the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing F8.
3. After setting each key, press F10 to save your changes and return to the Flexible Key
Program Administration screen.
➤ To make assignments to another console or console group
1. Scroll to another console/console group (+ scrolls forward, - scrolls backward).
2. Press Esc to close the DSS Console Button Assignments screen and return to the Flexible
Key Program Administration screen.
Attendant Console Flexible Button Assignments
Note This option cannot be used by Strata DK Release 2 or below.
➤ To access the option
➤ Highlight the Attendant
Console Flexible Button
Assignments option and
press Enter. The
Attendant Console
Flexible Button
Assignments screen
displays (shown right).
This screen enables you
to assign features to both
left and right key
assignments.