Filter
Top Products
Maintain Customer File ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
38
DKAdmin/DKBackup
After Connect
Enter the After Connect String when calling into a Strata DK modem pool (see
Figure 20 on Page 135). It is recommended that you enter AT~~~ATDDYYY as
the After Connect string (where YYY is the extension number of the PDIU-DS
connected to the Strata DK TTY port).
Notes
● If you are not using the modem pool function, the DK security code can be set
on the After Connect line in each Customer File setup so it will be sent
automatically to the Strata DK after connecting the DKAdmin/DKBackup PC to
the Strata DK remotely via modems. Setting the DK security code in the After
Connect String is optional.
● In some cases, when connecting to older Release 1 processors or during heavy
traffic conditions, the After Connect string may be sent and not recognized by
the Strata DK. If this should occur, do not enter the DK security code in the After
Connect string.
DK Model, Release Press Enter and the DK Model, Release dialog box appears. Highlight the
appropriate processor type and software release number and press Enter.
Important!
●
For proper operation, be sure you select the appropriate software release.
●
If creating a new customer to upgrade a processor, select the current release
level (i.e., if upgrading from RCTUB2, select Release 2).
●
To upgrade a Release 1 or Release 2 processor to Release 3 or Release 3.10,
select Release 1 or 2; the upgrade process converts this line to Release 3.
●
To upgrade Release 3 to Release 3.10 processors, select Release 3.
Data Directory The customer directory automatically defaults to the assigned customer ID. You
may change the directory as desired. This is the directory in which all customer
data is stored on the DKAdmin/DKBackup PC disk drive. DKAdmin/DKBackup
automatically adds the “.DK” extension on the end of the directory.
Table 2 Customer File Maintenance Screen Fields
(continued)
Field Description
DK14, WMAU, R1
DK16e, TMAU , R1
DK40, TMAU, R1
DK , RCTU-A, R1/R2
DK , RCTU-A, R3.1
DK , RCTU-A, R4
DK , RCTU-B, R1/R2
DK , RCTU-B, R3
DK , RCTU-B, R4
DK , RCTU-CD, R1/R2
DK , RCTU-CD, R3
DK , RCTU-CD, R4
DK , RCTU-EF, R3
DK , RCTU-EF, R4