Filter
Top Products
How to Make Calls
You can make calls from the CCWin Dial Pad window. The telephone number is “dialed” by typing it in,
entering it at the dial pad, or selecting it from your Personal Directory or system directory.
Do the following to open the CCWin Dial Pad window:
Click on the Dial pushbutton on the CallCoordinator for Windows main window.
CallCoordinator for Windows displays the CCWin Dial Pad window (Figure 18 shows the CCWin Dial Pad
window with sample Personal Directory entries).
Figure 18. CCWin Dial Pad Window
Dialing a Number
Do the following to “dial” a number:
1. Click on the line that you want to use in the CallCoordinator for Windows main window (if you have
more than one line and the one you want is not selected).
2. Do one of the following:
Double-click on the name (of the person you want to call) in the directory displayed to the right
of the dial pad.
or
Type the number in the space below the dial pad, then click on Dial.
or
Click on each digit in the dial pad of the number you are calling (the number appears in the
space below the dial pad), then click on Dial.
If your telephone system switch requires a prefix (for example, to obtain an outside line), enter it
in the Dial Prefix box (located above the dial pad). You can enter up to three digits. Delete the
prefix after each call, unless you need it for the next call. (To delete it, select the Dial Prefix
box, and use the Backspace or Del key.)
Chapter 3. Using the Telephone Features 35