Filter
Top Products
Firmware Pages and Descriptions
79
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
Environmental acoustics, personal voice level and ambient noise are all deciding factors when setting your
mic, intercom and panel sound levels. Consider your environment when adjusting intercom and sound levels
and use caution so as not to damage the speaker.
Audio Settings Page Elements (Cont.)
Master Volume: This section allows you to alter the current master volume level:
• Use the UP/DN buttons to adjust the volume level (range = 0 - 100).
• The Master Volume bargraph indicates the current volume level.
Default = 50
• The Mute button toggles the Mute feature.
Default Panel Sounds: Sets the Modero panel to play various sounds.
• Activating the Button Hit button plays a default sound when you touch an
active button.
• Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
• The Play Test Sound button plays a test WAV/MP3 file over the panel’s
internal speakers.
• The Information button opens the Panel Sounds Information popup window
(FIG. 60).
Digital Audio Level: This section allows you to adjust the current sound level on the internal panel
speaker:
• Use the UP/DN buttons to adjust the volume output on the internal speakers
(range = 0 - 100).
• The Internal Sound Level bargraph indicates the current sound level.
Default = 50
• The Mute button mutes the volume.
Analog:
Line In Level: Allows you to adjust the current Line-In volume level (being received from the
communicating breakout box).
• Use the UP/DN buttons to adjust the Line-In volume level (range = 0 - 100).
• The Line-In Level bargraph indicates the current Line-In level.
• The Mute button mutes the Line-In volume.
Mic Out Level: Allows you to adjust the current Microphone volume level (being received from
the communicating breakout box).
• Use the UP/DN buttons to adjust the Microphone volume level
(range = 0 - 100).
• The Mic Out Level bargraph indicates the current Mic Out level.
Intercom:
Mic Level: Adjusts the volume level on the panel’s microphone
• Use the UP/DN buttons to adjust the microphone level (range = 0 - 100)
• The Mic Out Level bargraph indicates the current Mic Out level
Default = 40
Intercom Volume: Sets the volume level for intercom calls
• Use the UP/DN buttons to adjust the Line-In volume level (range = 0 - 100)
• The Line-In Level bargraph indicates the current Line-In level
• The Mute button mutes the Line-In volume
Default = 40