Filter
Top Products
Introduction
6
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
Product Specifications (Cont.)
Operating / Storage
Environment:
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included Accessories: • Installation Kit for 7" NXD panels (KA2258-02) includes:
- 2-pin 3.5 mm mini-Phoenix connector (41-5025)
- Three Drywall clips (62-5924-05) and #6 - sheet metal screws
- Four Phillips-head screws (#4-40 x 0.250 Black)
• NXA-AVB/ETHERNET Breakout Box (FG2254-10): Provides video/audio
distribution to the A/V panel over CAT5 cable (up to 200’/60.96m) and
accepts either Composite or S-Video.
- Although the NXD-700Vi is only sold as part of a KIT configuration, the
breakout box can be purchased as a separate accessory.
• Trim Ring with button openings (60-2258-26)
• Trim Ring without button openings (60-2258-25)
Other AMX Equipment: •CB-TP7 (FG035-10)
- 7" metallic conduit box for Wall Mount installations.
• CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965)
• NXA-RK7 (FG2904-53)
- RackMount kit for 7" Wall Mount touch panels (NXD panels only).
Kit includes eight #10-32 screws and washers.
• NXA-WC80211GCF Wireless Upgrade Kit (FG2255-07)
- AMX 802.11G Compact Flash provides wireless Ethernet support
• Upgrade Compact Flash (factory programmed with firmware):
NXA-700CF256M, 256 MB COMPACT FLASH CARD (FG2116-73)
NXA-700CF512M, 512 MB COMPACT FLASH CARD (FG2116-74)
NXA-700CF1G, 1 G COMPACT FLASH CARD (FG2116-75)
It is recommended that firmware KIT files only be transferred over a direct USB or
Ethernet connection and only when the panel is connected to a power supply. If
battery power or wireless connection fails during a firmware upgrade, the panel flash
file system may become corrupted.