Filter
Top Products
Introduction
2
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
These Color Video (CV) panels display NTSC/PAL/SECAM video formats within variable sized windows.
They include a built-in microphone, speaker, audio/headphone connector, and six NetLinx programmable
pushbuttons (available on NXD models only when mounted with included Button Trim Ring).
Each panel is sold only as part of a kit which includes both a panel and an NXA-AVB/ETHERNET Audio/
Video Breakout Box (FG2254-10). This box facilitates the installation and distribution of video (either
Composite or S-Video), data (via Ethernet), and audio to Modero touch panels located up to 200 feet (60.96 m)
from the breakout box. NXD-700Vi panels are ideally suited for displaying full motion video and audio with
overlay graphics for applications with demanding visual requirements.
Key features common to both panels include:
NXD-700Vi panels are based on the latest display technology and support AMX's 4th generation
(G4) graphics which provide higher brightness, richer colors, and deeper contrast. The new G4
graphics technology is supported by the latest AMX TPDesign4 Touch Panel Design program
(version 2.6 or higher).
NXD-700Vi panels display eye-catching images and full-motion video on a large 16:9 image
format, while providing a wide 100-degree top-to-bottom viewing angle.
NXD-700Vi panels feature a front panel light sensor, motion sensor, IR receiver and a Sleep/Setup
Access combo button.
NXD-700Vi panels support AMX Computer Control, which enables remote viewing and control of
any networked computer directly from the panel. This gives the user the ability to launch digital
music from a PC, cruise the Internet, check and respond to E-mail, open software files, and launch
applications. Anything you can do on your PC can be accomplished through these panels.
The wireless solution includes an NXA-WC80211GCF internal Wi-Fi card (FG2255-07) that
allows the NXD-700Vi to communicate with a NetLinx Master via a standard 802.11g Wireless
Access Point.
NXD-700Vi panels feature programmable firmware that can be upgraded via either the Ethernet
port, wireless interface card, or the mini-USB port.
NXD-700Vi Widescreen Video Touch Panel Kit
NXD-700Vi
(FG2258-04K)
7" Widescreen Color Video Wall Mount Touch Panel Kit (with buttons)
(includes both an NXD panel and an NXA-AVB/ETHERNET A/V Breakout Box).
The NXD-700Vi panel (FG2258-04) is shipped, by default with a Trim Ring containing
buttons, but the end user can later install the included Trim Ring without button
openings.