Filter
Top Products
Configuring Communication
48
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
Configuring the Modero’s wireless card for secured access to a WAP200G
After logging into the WAP200G, the default Status page appears within the web browser. These
read-only values are "pulled" from some of the other user-configurable Configuration Utility pages. By
default, wireless Modero panels are configured for unsecured communication to a Wireless Access Point. To
properly setup both the WAP200G and panel for secure communication, you must first prepare the Modero
panel and then use the information given to fill out the fields within the WAP’s
browser-based Basic Wireless Configuration page.
Since the code key generator on Modero panels use the same key generation formula, all panels will generate
identical keys for the same Passphrase. The generators used on WAPs will not produce the same key as the
Modero generator even if you use the same Passphrase. For this reason, we recommend FIRST creating the
Current Key on the Modero and then entering that information into the appropriate NXA-WAP200G
fields.
Automatically set SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Press the Site Survey button.
3. Select a WEP secured WAP from within the Site Survey page, and press the Connect button.
4. Write down the SSID name, Current Key string value, and panel MAC Address information so you can
later enter it into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These
values must be identically reproduced on the target WAP.
FIG. 31 Site Survey of available WAPs (Secured WAP shown selected)
Select a target
WAP with the
desired level of
security
Connecting to the
WAP begins the
communication