Filter
Top Products
NXD-700Vi Touch Panel Accessories
15
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
This card works with compatible 802.11b/g Wireless Access Points such as the NXA-WAP200G (which uses a
default SSID of AMX). Please follow your particular Wireless Access Point’s instruction manual for the correct
procedures to setup either a secured or unsecured connection. The following table lists the specifications for
the NXA-WC80211GCF.
This upgrade kit requires that pre-existing panels first be removed from their current location (surface, wall or
docking station) before an installer can access the internal circuit boards and upgrade a
pre-existing 802.11b wireless CF card.
Only MVP panels require the use of a cardboard cutout (Mounting Template) to properly position the metal
antenna plate onto the inner surface of the unit’s rear plastic housing
NXD-700Vi, NXD-1000Vi, CV7, and CV10 panels only require locating the Compact Flash’s metal cover
plate on the main circuit board and then adhering the terminal antenna connector to that location using the
included double-sided adhesive tape.
The procedures for upgrading a CF card on an MVP is identical for both MVP-7500 and MVP-8400 panels.
The procedures for upgrading/installing the new CF card are also similar across all referenced NXT panels and
NXD panels as a group (differences arise from their housing).
If the CF metal cover plate is not present over the wireless card slot on a NXD-700Vi,
NXD-1000Vi, CV7, or CV10 panel, you can use the adhesive tape to secure the
terminal antenna to the surface of the new card (atop the product label).
NXA-WC80211GCF Specifications
Dimensions (HWD): • 0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)
Weight: • 19.50 grams (0.043 lbs)
Description: • Wireless LAN Compact Flash Card with external PIFA antenna.
• Features enterprise-class security such as WPA and WPA2 security.
Features: • Compact Flash Type I form factor
• Enhanced range and throughput
• Features wireless security such as: WPA, WPA2 and WEP
• Field-installable
• Incorporates DSSS and OFDM radio technology
• Operates at ISM frequency bands of 2.4 GHz, while providing data transfer
speeds of up to 54Mbps.
• Support for IEEE 802.11b and 802.11g
• Supports Advanced Encryption Standard (AES) 64-bit and 128-bit data
encryption, along with an Re4 encryption cipher (64/128-bit)
• Supports authentication methods such as: EAP-FAST, EAP-LEAP, EAP-PEAP,
EAP-TLS, and EAP-TTLS
• Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption
(known to the on-board firmware as Static WEP)
Antenna Type: • External PIFA antenna (factory-installed)
Bus Interface: • Compact Flash Type I
Certifications: • FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi
Media Access Control
Techniques:
• Using 802.11b DSSS communication:
DBPSK @ 1 Mbps
DQPSK @ 2 Mbps
CCK @ 5.5 Mbps
• Using 802.11g OFDM communication:
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps