Filter
Top Products
Firmware Pages and Descriptions
104
NXD-700Vi 7" Modero® Wall/Flush Mount Touch Panel with Intercom
Refer to the EAP Authentication section on page 201 for further details on these security options.
Refer to the Using the Site Survey tool section on page 44 for more information on using this
feature.
EAP-TLS Settings
Press the EAP-TLS button to open the EAP-TLS Settings page (FIG. 77).
TLS (Transport Layer Security) was the original standard wireless LAN EAP authentication protocol. TLS
requires additional work during the deployment phase but provides additional security since even a
compromised password is not enough to break into an EAP-TLS protected wireless network environment.
EAP-TLS security is designed for wireless environments where it is necessary to securely transmit data over a
wireless network by adding an additional level of security protocol via the use of a private key.
EAP-FAST Settings (Cont.)
Save/Cancel: • Save - store the new security information, apply changes, and return to the
previous page.
• Cancel - discard changes and return to the previous page.
FIG. 77
Wireless Settings page - EAP-TLS Settings
EAP-TLS Settings
SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target
WAP.
The SSID is a unique name used by the WAP, and is assigned to all panels
on that network. An SSID is required by the WAP before the panel is permit-
ted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP200Gs use AMX as their default SSID.
• With EAP security, the SSID of the WAP must be entered. If it is left blank,
the panel will try to connect to the first access point detected that supports
EAP. However, a successful connection is not guaranteed because the
detected WAP may be connected to a RADIUS server, which may not
support this EAP type and/or have the proper user identities configured.