Filter
Top Products
Calibrating
Each person holds a pen differently. in order for the unit
the touch
to be able to respond properly to your individual style of
panel
writing, drawing, or selecting touch buttons, the touch
panel must be calibrated.
1. Press
CMENU)
and then touch
-1.
2. Touch ADJUST LCD.
A submenu appears.
3. Touch ADJUST TOUCH PANEL.
<
ADJUST
TOUCH PANEL
>
Please touch the exact center of
al
1
four cross-points with the
organizer's pen.
4. Touch the center of each of the four crosses with the
touch pen.
If the adjustment is successful, “Adjusted!” appears on
the display. If for some reason the adjustment fails, the
message “Sorry, please try again” will appear. Touch the
centers
of all four crosses again until the touch panel is
calibrated.
Setting the
From time to time, the contrast of the LCD display may
LCD
con-
have to be adjusted. You may find, for example, that a
trast to suit
contrast setting that was fine for the home or office is not
various
adequate when outside or on an airplane. Follow the
lighting
procedure below to adjust the LCD contrast.
conditions
1. Press
(MENU)
and then touch
)TOOLS]
.
2. Touch ADJUST LCD.
A submenu appears.
52