Filter
Top Products
3. Set the IC card lock switch to the RELEASE position,
(a red bar can be seen in the RELEASE position.)
4. Slide the IC card eject switch and remove the protection
card.
IC
card
lock
switch
IC
card
eject
switch
5. Insert the
IC
card all the way into the card slot, with the
back of the card facing up.
6. Set the IC card lock switch to the LOCK position.
r@
0
0
0
0
The unit will not turn on if the IC card lock switch is in
the RELEASE position.
Store the protection card in a safe place and be sure to
put it back into the unit when there is no
IC
card
installed.
If the battery of an installed card is depleted, a
message indicating this will appear. Turn the unit off
immediately and replace the
IC
card battery as soon as
possible (leaving the card locked in the unit) to avoid
losing data. Refer to the card manual for more
information.
If a message indicating a problem with
card memory
appears, touch
1
INITIALIZE
to continue, clearing the
card memory.
221