Filter
Top Products
Points to Remember When Using Peripherals
When using IC cards formatted for units other than
8900/9000
Series:
l
Cards that are 3.4 mm thick, such as the
IQ-780s
and
application cards of the
IQ-775/lQ-776
format, cannot
be used with this unit. Forcing these cards into the
unit may cause damage.
l The
IQ-709A,
IQ-72’1
and IQ-8802 cards cannot be
used with this unit.
l
The following keys on this unit cannot be used (refer to
the
IC
card operation manual as regards the other
keys):
[SCRAPBOOK]
(G]
(SEND)
(GV$
(D
A
TE
sm4h~P]
[P
RINT
SCREEN)
[KGRq
(CUT) (MENU)
l
The
vl
key mentioned in IC card operation
manuals is re resented b the
C2ndj
key on this unit.
Ekl&
Also, the
SHIFT
FUNCTION
key operation is
performed by
pressin
the
(SHIFT/
(OPT10
C2nd)
then touching
m,
and
operation by pressing (2nd)
m.
The displays for these operations might be
different from those in the
IC
card manuals.
l
To transfer data from a card, first select card memory,
m.
To transfer data from the unit,
touch
1
PERIPHERALS
1
after
selecting any application on the unit. To use the
Memory Check or Data Deletion functions with a card,
first select card memory then press
i2ndj
(w)
.
l
You cannot move the cursor by touching the IC card
window and you cannot highlight text in it by dragging.
Use the cursor keys to move the cursor.
l
When using the
IQ-702A,
IQ-704B,
IQ-71 1 B,
IQ-712B,
IQ-715A,
IQ-716B,
IQ-8DOlA,
you can enter data in the
clipboard by pressing
[2ndj
I%%%).
However, you
cannot enter data in the clipboard if the amount of free
memory is small.
l
The following cards can be used in conjunction with
most of the unit’s built-in applications. Press
[m)
[m)
to access these dictionaries while using a
274