Filter
Top Products
65
Configuring the conference system
Setting the operating mode/functions of the selection keys A and B –
“Chairman Config”
You can assign different operating modes and functions to the selection
keys
A 8 and B 9 of the WiCOS C and WiCOS CV chairman units.
̈ In the main navigation, click “Conference Management” > “Chairman
Config”.
The “Chairman Configuration Settings” overview screen appears.
̈ In the “Menu Mode” box, select the desired option button:
̈ Click “Save settings”.
The setting is saved. The selection keys A 8 and B 9 of the WiCOS C
and WiCOS CV chairman units are assigned the desired function/
operating mode. With the WiCOS
CV chairman unit, the multi-function
display
7 displays the operating mode set.
9
8
C CV D DV
9
8
C CV D DV
Option button Mode Function
“Start/Stop
Voting“
Voting mode
• Selection key A 8 stops a
voting session
• Selection key B 9 starts a
voting session
“Volume Control“ Volume adjustment mode
for loudspeakers
• Selection key A 8
increases the volume
• Selection key B 9 reduces
the volume
“Function key“ Media control mode
• Selection key A 8 controls
external media devices
• Selection key B 9 controls
external media devices
With the WiCOS CV chairman unit, you can also set the operating
modes directly on the device (see
page 15).