47
Configuring the conference system
Apple MacOS X operating system If you are using Apple MacOS X, proceed as follows in order to set a static
IP address (see also the instruction manual of the operating system):
̈ Click the “Apple” icon and select “System Preferences”.
The “System Preferences” window opens.
̈ Click “Network”.
The “Network” window opens.
̈ From the “Show” drop-down list, select “Built-in Ethernet”.
̈ Click “Configure...”.
The “Built-in Ethernet” window opens.
̈ From the “Configure IPv4” drop-down list, select “Manually”.
̈ In the “IP address” field, type your desired IP address, e.g.
192.168.0.12.
̈ In the “Subnet mask” field, type the subnet mask 255.255.255.0.
Both addresses have to be within the address range of the access point.
̈ Confirm your entries by clicking “Apply now”.
Do not use the IP address of the access point: 192.168.0.10.