Sennheiser WiCOS Conference Phone User Manual


 
53
Configuring the conference system
Adjusting the RF settings – “RF configuration
Setting the RF signal strength – “General“
The RF signal strength of the conference system can be set in two different
ways:
automatic setting of the RF signal strength (recommended)
manual setting of the RF signal strength
̈ In the main navigation, click “RF Configuration”.
The “General RF settings” overview screen appears.
To set the RF signal strength to automatic mode:
̈ In the “Room size” box, select the “(Auto)” option button.
̈ Click “Save settings”.
The setting is saved. The RF signal strength is automatically adapted to
the operating conditions/room size.
To manually set the RF signal strength:
̈ In the “Room size” box, select the appropriate option button:
̈ Click “Save settings”.
The setting is saved. The RF signal strength is set to the selected power.
Setting the frequencies – “General“
The frequency selection of the conference system can be set in two
different ways:
Option button RF signal strength Area of application
Big maximum RF signal
strength
large rooms of
approx. 3000
Medium medium RF signal
strength
medium sized rooms of
approx. 2000
Small low RF signal strength small rooms of
approx.
1000