Configuring the conference system
52
̈ Click “Save settings”.
The settings are saved. The selected country is displayed in the
“Selected Country Region” field. The conference system will only use
frequencies and transmission powers that are approved and legal in
the selected country/region.
Setting the password protection – “Admin“
You can protect the access point against unauthorized access and changes
to the system by setting a password. The factory default password is
“123”.
̈ In the main navigation, click “Setup” > “Admin”.
The “Admin: authentication” overview screen appears.
̈ In the “Old password” field, type the old password.
If you want to use the factory default settings, type the default
password “123”.
̈ In the “New password” and “Confirm new password” fields, type the
new password.
The password can consist of a maximum of 50 characters.
̈ Click “Save settings”.
The new password is saved. The next time you switch the access point
on, access to the web server is protected by the new password.
The country-specific radio settings for the United States and
Canada, “US/Canada”, are the most restricted radio settings in the
conference system. These settings are used as the factory default
settings.
If you reset the access point to the factory default settings, the
password is “123”.
For safety settings for encryption of the radio transmission, refer to
the chapter
“Eavesdropping protection and encryption –
“Encryption”” on page 67.