Sennheiser WiCOS Conference Phone User Manual


 
Putting the conference system into operation
24
The access point can be
mounted to a wall or ceiling or
mounted on a stand or
placed on a flat surface (e.g. table),
Mounting the access point to a
wall or ceiling
̈ Use suitable screws and the eyelets for wall mounting d at the rear of
the access point to mount the access point to a wall.
Mounting the access point on
a
stand
̈ Use a stand with 5/8” mounting stud (adapter to 3/8” mounting stud
available as optional accessory,
see “Accessories and spare parts” on
page 83).
̈ Adjust the legs of the stand.
̈ Use the stand mount g to screw the access point on the stand.
30 m 30 m
The transmission range of the conference units and the access
point is approx. 30
m. The transmission range can vary depending
on location and environmental conditions such as wall thickness,
wall composition etc.
95 mm
d
d
5/8''
g