Filter
Top Products
25
Putting the conference system into operation
Placing the access point on
a
flat surface
̈ Place the access point on a flat, horizontal surface.
Aligning the antennas ̈ Align the 3 antennas vertically.
̈ Switch the access point on (see page 29).
Putting the conference units into operation
Connecting the microphone
̈ Connect the gooseneck microphone to the microphone socket 4 so
that the protrusion engages with the indentation.
̈ Screw down the coupling ring 3.
The microphone is securely connected to the conference unit.
̈ Set up the conference unit so that it can be comfortably operated by
the participant.
CAUTION! Risk of staining of furniture surfaces!
Some furniture surfaces have been treated with varnish,
polish or synthetics which might cause stains when they
come into contact with other synthetics. Despite a thorough
testing of the synthetics used by us, we cannot rule out the
possibility of staining.
̈ Do not place the access point on delicate surfaces.
4
3