Filter
Top Products
15
Overview of the components
Multi-function display 7 of the WiCOS CV chairman unit
The multi-function display 7 can display three different operating modes.
To switch between the operating modes and displays:
̈ Press the ABSTAIN key C for approx. 3 seconds.
You can switch between the following modes and displays:
–Voting mode (“Start/Stop Voting”)
– Volume adjustment mode for loudspeakers (“Volume Control”) and
–Media control mode (“Function key”).
Depending on the mode, the selection key A 8 and the selection
key
B 9 are assigned different functions.
The display has an automatic brightness control. Approx. 4 seconds after
the last key press, the brightness will be reduced. With each key press, the
display will light up with maximum brightness.
9
C
8
7
You can also switch between the operating modes using the web
server (see
page 65).
Voting mode
“Start/Stop Voting”
Display Function/Meaning
L Start Selection key B 9 starts a voting session
M Stop Selection key A 8 stops a voting session
Volume adjustment mode for
loudspeakers “Volume Control”
Display Function/Meaning
N Volume of the
conference units’
loudspeakers
Adjusted volume of the conference units’ loudspeakers K
Selection key A 8 increases the volume
Selection key B 9 reduces the volume
Media control mode
“Function key”
Display Function/Meaning
O Media control 1 Selection key A 8 controls external media devices
P Media control 2 Selection key B 9 controls external media devices
L
M
N
O P