49
Configuring the conference system
Adjusting the basic settings – “Setup“
Overview screen – “Summary“
The overview screen provides information on the system settings
(“System Information”) and the device settings (“Device Information”),
e.g. for servicing purposes.
̈ In the main navigation, click “Setup”.
The “Summary” overview screen appears.
Setting the network address of the access point – “TCP/IP Settings“
The fixed IP address 192.168.0.10 and the subnet address 255.255.255.0
are factory preset. Using this address, you can access the web server.
Setting
Function/Meaning Additional
information
“System Name“ User selectable name for the network address of the
conference system
see page 49
“IP Address“ IP address of the access point
“Subnet Mask“ Subnet address of the address point
“Address Mode“ Address mode of the network address
“Base MAC Address“ MAC address of the access point
“Serial Number“ Serial number of the access point see page 67
“Model Name“ Model name of the access point
“Hardware Version“ Version number of the hardware
“Boot Version“ Version number of the boot firmware
“Firmware Version“ Version number of the firmware
“FPGA Version“ Version number of the conference units’ firmware
“RF Hardware 1 Version“ Version number of the transmission hardware
“RF Hardware 2 Version“ Version number of the reception hardware
“RF Firmware 1 Version“ Version number of the transmission firmware
“RF Firmware 2 Version“ Version number of the reception firmware