Filter
Top Products
Switching the components on/off
30
To switch the access point off:
̈ Set the on/off switch m to position “0”.
The 3 status indicators ^ go off.
To disconnect the access point from the mains:
̈ Unplug the DC power supply from the wall socket.
The access point is completely switched off.
Max. number of
simultaneously active
microphones
To set the max. number of
simultaneously active
microphones in a discussion
see page 57
Conference mode To set the conference mode see page 58
Loudspeaker volume To set the volume of the
conference units’ loudspeakers
see page 59
Number of interpretation
channels
To set the number of the
interpretation channels
see page 60
Operating mode of the
chairman units
To set the function of the
selection key A 8 and B 9
see page 65
Operating mode of the
access point
To set the access point to stand-
alone operation or integrated
operation (slave mode) with
SDC
8200
see page 61
Initialization mode of the
conference units
To initialize the conference units
on the access point
see page 57
Encryption mode To set the encryption mode for
radio transmission
see page 67
Configuration Function/Meaning
Detailed
information
m
NT-AP