Configuring the conference system
48
Accessing the access point (overview screen)
̈ Switch the access point on (see page 29).
̈ Start a web browser (e.g. Internet Explorer or Firefox).
̈ In the address box of the browser, type the IP address of the access
point: the factory default IP address 192.168.0.10 or your adapted IP
address.
̈ Press the Enter key or click the “Refresh” button of your web browser.
The web server appears in the browser window and prompts for a
password.
If you have not assigned a password:
̈ Type the default password “123” into the entry field.
̈ Click “OK”.
The “Summary” overview screen of the web server appears.
If you have assigned a password (see page 52):
̈ Type the password into the entry field.
̈ Click “OK”.
The “Summary” overview screen of the web server appears.
Make sure the network communication between access point
and computer is not blocked by a proxy server and/or a firewall.
If you have forgotten the password, you can reset the access
point to the factory default settings in order to be able to access
the web server (see page 44).
Attention: If the access point is reset, any custom settings will
be lost!